Features
Our New 6v Regulator has been updated to
include an On-Board Power Switch and LED like our other Regulators.
Another update we have done was added a second Rx Power Lead and also
changed it so all the wires come out of the same side on the Regulator.
Each Regulator is pre-wired with male/female leads for the
Battery Input, Rx and Gyro / Tail Servo as well as 16AWG Silicone Wire
and a Deans Compatible Battery Input.
The Unique design of the Heatsink with ULTRA-THIN Fins allows
for super fast dissipation of heat and makes Installation a breeze due
to not needing air-flow over the Heatsink.
Also built into the same unit is a 5.0v relay for use with
Gyro / Tail Servos that are suggested to use an input of 4.8v - 5.1v.
This compact and light-weight Voltage Regulator will definatley exceed your expectations!!!
|
Min. Input Voltage: |
7.4v |
|
Suggested Input Voltage: |
7.4v |
|
Main Output Voltage: |
Constant 6v @ 10A |
|
Gyro/Tail Output Voltage: |
Constant 5.0v @ 1.5A |
|
Max. Main Amp Rating: |
16A |
|
Max. Gyro/Tail Amp Rating: |
3A |
|
Heatsink Material: |
Aluminum |
|
Length of Lead Plugs: |
6" Each |
|
Plug Type: |
Universal |
|
Size: |
60mm x 30mm x 9mm |
|
Weight: |
31.7g |
|
