 |
Features
Flash-Link
Many
Spartan products benefit from computer connectivity capabilities for
the purpose of modifying their configuration parameters or updating
their firmware when improvements are made. To take advantage of these
features an optional Flash-Link or Blue-Link interface module is
required offering USB or Bluetooth connectivity respectively. In
addition to computer connectivity the Bluetooth option can be used with
certain PDAs and mobile phones providing a convenient way for editing
configuration parameters at the field. Not all of our products support
these options; specific information can be found on each product’s own
web page.
Flash-Link Requirements
USB1.x or USB2.0 enabled PC running Windows XP or Vista operating system.
Installation
The
Flash-Link is an intelligent cable incorporating a USB controller
inside the USB plug housing and therefore it requires operating system
drivers to function. For a smooth installation endure that the drivers
are already installed before plugging the cable to the computer for the
first time.
Any computer software related to the product that
you wish to interface to can be downloaded from the the particular
product's web page.
Drivers for old type cables
If your
Flash-Link cable is not identical to the one pictured on this page you
will need to use the drivers below. Observe the colour of the servo
type plug fitted to your cable to choose the appropriate driver below.
• Flash-Link (blue plug) Driver v2.0.2.1 for Win2K/XP/2003 (XP Logo Certified)
• Flash-Link (blue plug) Driver v3.2.0.0 for Windows Vista 32bit and 64bit
• Flash-Link (black plug) Driver. Only use if Windows can't automatically locate it.
|
|
|
 |
|
 |
|
|
|
