 |
Features
The ProgCARD II serves for adjustment individual parameter of the JIVE governor families. With the ProgCARD II also parameters can be changed, which cannot be ellt by mode programming or only reduced eingest. Characteristics with the governor are not available are not indicated. They are jumped over with the selection.
The ProgCARD II must be connected with the master “connection of the JIVE of governor in the right polarity. When sticking on a Antriebsakkus to the governor first the parameters of the number of revolutions plate already stopped are picked out and indicated by means of the LED. With automatic controllers without BEC both the Antriebsakku and a Empfängerakku must be attached.
Note: A direct connection from the receiver to the governor may not exist for the programming process
Programming Features:
Brake Intensity 10 - 100% by 2.5% Steps
BEC Voltage 5V - 6V by 0.2V Steps
RPM Governor
Integral or Proportional Gain
Throttle Hold and Motor Rotation
Easy to use by selecting your settings and press a button.
Instruction:
|
|
|
 |
|
 |
|
|
|
